Rubber Automatic Injection Molding Machine
Rubber automatic injection molding machines can be used in various industries, including automotive, aerospace, electronics, medical, and consumer goods manufacturing. They are capable of producing a wide range of rubber parts, such as seals, gaskets, O-rings, rubber plugs, rubber gloves, and more.
These machines offer advantages such as high production efficiency, repeatable and accurate molding, minimal waste, and the ability to mold complex shapes and geometries. However, they require proper machine setup, material selection, and process optimization to achieve optimal results.
A rubber automatic injection molding machine, also known as a rubber injection molding press, is a specialized machine designed for the production of rubber or elastomer parts. It utilizes the injection molding process to efficiently and accurately mold rubber materials into various shapes and sizes. Here are some key features and capabilities of a rubber automatic injection molding machine:
Injection System: The machine is equipped with an injection unit that can heat and melt the rubber material, and then inject it into the mold cavity. The injection system typically includes a screw or plunger mechanism that pushes the rubber material into the mold under high pressure.
Clamping System: The machine features a clamping system that securely holds the mold in place during the injection process. The clamping force is adjustable to accommodate different mold sizes and part geometries.
Heating and Cooling System: Rubber requires precise temperature control during the injection molding process. The machine has a heating system that heats the rubber material to its melting point and maintains consistent temperature throughout the molding process. It also has a cooling system that rapidly cools down the molded rubber part for efficient demolding.
Mold Opening and Closing: The machine has a mechanism to open and close the mold to insert and remove the mold for production. This can be manual or automated, depending on the machine design.
Control System: The machine is operated through a control panel with a user-friendly interface. The control system allows the operator to monitor and adjust parameters such as temperature, injection speed, pressure, curing time, and more.
Ejection System: Once the rubber part has been molded and cured, an ejection system is used to push the finished part out of the mold cavity. This can be achieved through mechanical or pneumatic means.
型号Size | LBP-20L | LBP-200L | LBG-4L | LBG-6L | LBG-10L | LBG-20L | LBG-40L |
注射容积((L) | 无 | 无 | 4 | 6 | 10 | 20 | 40 |
胶料输出压(Mpa) | 0-25 | 0-25 | 0-25 | 0-25 | 0-25 | 0-25 | 0-25 |
胶料输出速度 | 0-2 | 0-4 | 0-6 | 0-6 | 0-6 | 0-6 | 0-6 |
料简容积(L) | 20 | 200/20 | 200/20 | 200/20 | 200/20 | 200/20 | 200/20 |
料筒内径(mm) | 280 | 571.5/280 | 571.5/280 | 571.5/280 | 571.5/280 | 571.5/280 | 571.5/280 |
装机容量(kw) | 3 | 3 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 |
机器尺寸(mm) | 1.1x0.8x1.7 | 1.6x1.4x1.8 | 2.2x1x2.3 | 2.7x1.5x2.3 | 2.7x1.3x2.7 | 1.9x1.3x3 | 3.1x1.5×3.4 |
机器重量(Ton) | 1 | 1.5 | 2.5 | 3 | 3.5 | 4 | 5 |
Related News
Submitted successfully
We will contact you as soon as possible